Arcoplast > Closed-Edge |
Download Shop Drawings |
Arcoplast closed-edge ceiling tiles are finished with a permanently hard, impermeable, fire resistant, high-gloss gel coat that is remarkably easy to clean and maintain.
Constructed with a permanent seal, Arcoplast's closed-edge ceiling tile is resistant to moisture, freeze-thaw, rodents, vermin, and fungi.
Because of Arcoplast's unique manufacturing process, our closed-edge ceiling tiles can provide up to a 40lb uniform load while maintaining a deflection of L/360.
Tiles: A foam-core tile layered each side by uniform glass-fiber mat embedded in a fire-retardant resin faced with a gel-coat finish.
Foam Core: Polyisocyanurate closed cell, class "A"
Facing: Fire Retardant, hard, smooth, glossy gel-coat finish.
Thermal Resistance: R=6.56 per 1" of foam.
Thermal Conductivity: W/mc.022 (.15) BTU in/ft.hf
Core Shear Strength: k Pa (lbs/in) 193 (28)
Core Compression Strength: ASTM-D-1621 k Pa (lbs/in) 170(25)
Dimensions: 4'x 4', 2'x 4', 2'x 2' Nominal. 47 3/4"x 47 3/4", 23 3/4"x 47 3/4", 23 3/4"x 23 3/4" Actual
Thickness: 5/8", 1", 1 1/2", 2"
Load-Bearing Capabilities: 4'x4'x1" tile provides a 40lb uniform load while maintaining L/360.
Sanitary Use: Arcoplast tiles are approved for use in registered establishments across North America.
Warranty: Arcoplast tiles are guaranteed to be free from cracking, crazing, and peeling for five (5) years.
Transportation: Arcoplast tiles are shipped and stored on 4'x 4' skids. Tiles at the job site pending installation should be properly stored and protected before and during installation.
Cleaning: Arcoplast tiles can be steam treated with common solvents. In order to maintain a smooth high-gloss finish no abrasives should be used.
